Model P-600 Salt In Crude Analyzer

for continuous measurement of the concentration of salt in crude oil

P-600-1.00

Vorteile

Variable measurement ranges of up to 0-400 PTB (0-1000 mg/L)
Rapid analysis cycle of 6 minutes
Superior repeatability of 2% of scale
Reliability better than 99% uptime
Micro sample analysis reduces solvent consumption
Precise bi-directional cell temperature control
Incorporated rinse/flush system
Remote diagnostics over IP

Kennzeichnung

ATEX: Zone 1 II B + H2 T6
CSA/CUS: Class I Div 1 Group B, C + D

Richtlinien/Normen

Correlates with:
- ASTM D3230

Umgebungstemperatur

+5 up to +40°C (+41 up to +104°F)

Beschreibung

To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

Salt in crude is the amount of chloride based salts found in the sample in weight per volume.

Application

In certain areas of the world, crude oils with high level of salts exist. This crude oil must still be transported and refined and the high levels of salt pose problems if left untreated. De-Salting technology is well established but to be utilized effectively the need for quick and accurate measurements of the level of salt concentration is necessary. The immediate response of an on-line analyzer allows the operator to use De-Salters as efficiently as possible.

Dokumentation

Datenblatt - Model P-600 Salt In Crude Analyzer

Application Data Sheet Physical Property Analyzers